Wiseup F9000 Handbuch Seite 3

b)Press the Power Button once, red light will stop blinking and stay on,
showing the video is saved and the device back to standby mode.
c)The camera will save videos automatically every 10 minutes.
Taking photos
Under standby mode, press the Mode Button once, blue light will be on
indicating that the camera enters into the standby mode for photo-taking.
Press the Power Button, the blue light flashes for one tim e to complete the
photo-taking and image saving. Then it returns to the standby mode.
Motion detective recording
a)Under standby mode, press the Power Button for 2 seconds, the red light
and blue light both turn on, indicating the camera gets into motion detective
standby mode.
b)Under motion detective standby mode, when the target objective moves,
the blue light starts blinking and the red light stays on, it will record
automatically.
c)When the camera and target objective keep moving, the camera will save
videos automatically every 2 minutes
Reset
Under incorrect operation or a certain reason, the device may stop working,
at th is time, press power Power Button and Mode Button at the same time,
then the device will be power off.
Charging
Connect to computer USB interface or charger. During the charging, the red
light flashes slowly. When the battery is fully charged, the red light stops
flashing.
(Sometimes the red light will continue to flash even when the battery is fully
charged. Make sure you have charged the camera for at least 2 hours per
time. Then the camera can keep recording for around 70 minutes.)