All Reset - Panasonic WV-CU161C/B Bedienungsanleitung

All Reset

The WV-CU161C System Controller can be reset to the
default settings as follows:
1. Turn off the Power Switch.
2. Turn on the Power Switch while simultaneously pressing
numeric buttons 2, 4 and 6.
1
4
7
HOME
ESC
2 3
5 6
8 9
PRESET
0
SET
PROGRAM
PRESET
3. Resetting has been completed when all LEDs light up
for a few seconds and then go off (except for the
Operate Indicator).
Note: The downloaded data for the camera remains as
it is.
33