Environmental Notes And Disposal Information Declaration Of Conformity - ULTIMATE SPEED UPBS 8000 A1 Bedienungs- Und Sicherheitshinweise

... / Environmental notes and disposal information / Declaration of Conformity
IAN 290925
Please note that the following address is not a
service address.
Please first contact the service point (hotline)
named above.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
GERMANY
 Environmental notes and
disposal information
Don't waste, recycle!
Always recycle the tool, accessories and
packaging in an environmentally-friendly
manner.
138180
Do not dispose of the product in household waste,
in fire or in water. Whenever possible, devices,
which are no longer functional, should be recycled.
Contact your local retailer for information.
As the consumer you are legally
obligated (Battery Ordinance) to return
any used batteries. Batteries containing
harmful substances are labelled with the
adjacent symbol, which indicates the ban
on disposal in household waste. The ab-
breviations for the essential heavy metals
are: Cd = Cadmium, Hg = Mercury,
Pb = Lead.
Take used batteries to a disposal facility in your
city or community or back to the distributor. This
satisfies your legal obligations and you are greatly
contributing to protecting the environment.
290925_uls_Powerbank_content_Block_3_GB_PL_DE.indd 13
Declaration of Conformity

We,
C. M. C. GmbH
Responsible for documentation: Mark Uhle
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
declare in our sole responsibility the product
Portable jump starter with
power bank UPBS 8000 A1
Year of manufacture: 2017 / 43
IAN: 290925
Year of CE mark: 2017
Model: PORTABLE JUMP STARTER WITH
POWER BANK UPBS 8000 A1
meets the basic safety requirements of
European Directives
2014/30/EU
2014/35/EU
2011/65/EU
2009/125/EU
and their amendments.
The object of the declaration described above
meets the requirements of Directive 2011 / 65 / EU
of the European Parliament and Council dated 8th
June 2011, restricting the use of certain hazardous
substances in electrical appliances and electronics.
The conformity assessment is based on the
following harmonised standards:
EN 55032:2015
EN 55024:2010+A1:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50498:2010
EN 62321-1:2013 / EN 62321-2:2014 /
EN 62321-3-1:2014
GB 13
05.07.17 17:18