Key-Operated Ignition Switch Functions; Equipments; Accessory Socket; Adjustment Of Damper Settings - PEUGEOT CityStar Serie Bedienungsanleitung

NOTICE_CTS_EURO4_V3-04A.mif Page 14 Lundi, 6. mars 2017 10:27 10
KEY-OPERATED IGNITION SWITCH
FUNCTIONS
FR
A. The engine is off. Power to the electrical circuit is off.
The key can be removed.
B. Power to the electrical circuit is on. The engine can be
GB
started. The lighting is switched on. The key cannot be
removed.
A
DE
D
IT
C
ES
NL
C.Power to the electrical circuit is off. The handlebars are
turned to the left. Steering can be locked. The key can
be removed.
D.Action of the key in this position allows you to open the
GR
saddle with a cable device.
SE
PT
FI
DK
14/25

EQUIPMENTS

Accessory socket

A power socket, 12V-120W maximum, is fitted on the left
side of the glove box.
B
It can be used to connect low-voltage devices (mobile
phone, GPS, etc.). This socket is powered by the battery;
as a result, the accessory plugged in must be
disconnected when the engine is off to avoid discharging
the battery. This socket may also be used to recharge
the battery using a maintenance charger.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters

Adjustment of damper settings.

Each damper has an adjuster ring that can be used to
stiffen or soften the suspension, depending on the
vehicle load.
-
+
To guarantee your comfort and safety, always
adjust the damper preload in line with the
vehicle load.
Citystar 125/200 cc:
Perform the same setting for the 2 dampers.