Instruments (Citystar 50 Cc); Display Functions - PEUGEOT CityStar Serie Bedienungsanleitung

NOTICE_CTS_EURO4_V3-04A.mif Page 8 Lundi, 6. mars 2017 10:27 10

INSTRUMENTS (CITYSTAR 50 CC)

FR
The instrument panel initializes itself every time the
ignition is switched on:
• The speedo needle sweeps across the dial and returns
to zero.
GB
• A function test of the display unit segments and lighting
of all indicator lights are performed automatically.
DE 1 2
IT
ES
6 8 7
NL
1. Speedometer
Double-scale speedometer showing kilometers and
miles.
GR
2. Multi-function display
SE
3. Indicator STOP
• It blinks in case the oil pump suppy line is shut off or
short circuited. The engine is stopped as soon as it is
running at idling speed and can start again only if the
PT
incident has disappeared.
You are advised to have the system checked
by a registered dealer.
FI
DK
8/25
4. Min. oil level indicator
• If the oil indicator flashes or stays on, top up the oil in
the oil tank.
5. Main beam control
6. Direction indicator warning light
7. Battery charge warning light
• If the battery charge indicator flashes while driving, you
3 4
are advised to have the battery charging system
checked by an approved dealer.
8. Display control knob

DISPLAY FUNCTIONS

v
6 5
D
r
p
8 B F
A.Milometer
The tripmeter displays and stores the number of
kilometres travelled by the vehicle. The machine total
kilometres remains in the memory when the battery is
disconnected.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
B.Tripmeter (TRIP)
The tripmeter displays and stores the number of
kilometers travelled during a given period.
Changing from the total distance display to the daily
distance display
• With the ignition on, changeover from the total distance
to the daily distance display and inversely is by briefly
pressing the control button (8).
Resetting the tripmeter
Resetting the tripmeter is done from the TRIP position.
• Press the control button (8) for more than 3 seconds to
reset the daily tripmeter.
Choosing the display units
Choosing the distance unit is possible at any
time.
C
from "km" to "miles" or inversely.
E
- Turn off the ignition.
If the distance unit is kilometres, the outside
temperature is displayed in °C.
If the distance unit is miles, the outside
A
temperature is displayed in °F
-With the ignition off, hold
down the settings button (8),
switch on the ignition and
wait for the multifunction
display to come on.
-Select the unit by briefly
pressing the control button,
the distance unit changes