Section 3 Gear Lever And Wheel Unlock Levers - EMAK DR65HR11 Bedienung Und Wartungd

Chapter 5: Use
Section 3
Your flail mower has three forward
gears, one reverse gear and the neutral
position. In order to change gear, all you
need to do is move the gear Lever (Fig.
5.10) positioned at the left handle that
steers your vehicle. When in third gear
you can reach a maximum speed of 3.4
Km/h, while in reverse R the speed is
1,4 Km/h.
CAUTION :
Whenever changing
should always release the vehicle
clutch Lever. NEVER TRY TO
CHANGE GEAR
VEHICLE
LOWERED. THERE IS THE RISK
OF SERIOUS DAMAGE TO THE
GEARBOX
The right and left wheel unlockers
(Fig. 5.11) help turning direction when
working the flail mower.
CAUTION :
When working on a slope (Fig.
5.12) do NOT use the right and left
wheel unlockers simultaneously, this
would exclude the service brake
and overturn its security function.
Release the vehicle clutch Lever,
and the wheels block immediately,
and the service break will reactivate.
Gear lever and wheel unlock levers
gear,
WITH
CLUTCH LEVER
you
THE
22
Fig. 5.10
Fig. 5.11
Fig. 5.12