Dose Programming - Dalla Corte dc one Benutzerhandbuch

3. dose programming

(accessible by the user by entering the PW, if GCS is not in function)
If you press the
Single dose
2,000 s
Use the or buttons to modify the grinding time (and therefore the quantity) of the single dose.
Press the button to confirm and pass to the next setting:
Double dose
4,000 s
Use the or buttons to modify the grinding time (and therefore the quantity) of the double dose.
Press the button to confirm the setting and go back to the previous menu.
Press or to scroll the menu list or press
4. burr cleaning
(accessible by the user - no PW needed)
This function allows the user to start a periodic cleaning cycle of the grinding chamber (a weekly clea-
ning is suggested). This cleaning cycle must be carried out with a suitable cleaning product purchased
exclusively from the coffee grinder installer.
Remove all coffee beans from the hopper.
If you press the
4.1 Start
If you press the
Open gearmotor
Collect the remaining ground coffee into a food container.
Right after the remaining coffee has been ground, the display will show:
Introduce cleaning
tablets
Put the cleaning product in the hopper.
If you press the
Burr cleaning
During this phase, collect the ground cleaning product and throw it in organic waste bin.
At the end of the cleaning cycle, the display will show:
Close gearmotor
Press the button for 3 seconds to go back to the main page.
button, the display will show:
button, the display will show:
button, the display will show:
Grind remaining
coffee
button, the display will show:
Burr cleaning
completed
for 3 seconds to go back to the main page.