Starting The Appliance; Settings And Adjustments - Dalla Corte dc one Benutzerhandbuch

starting the appliance

Switch on the appliance with the ON/OFF switch
(pic.1).
When the display shows the notice contained in
the flow chart below, the coffee grinder is ready.
DC-ONE can be operated in 2 modes, which can
be set by the installer during the set-up stage;
Mode 1
• Press to obtain 1 coffee dose
(Single Shot)
• Press to obtain 2 coffee doses
(Double Shot)

settings and adjustments

If you want to access the main menu to get information or modify DC-ONE grinder setting parameters,
press the button for 3 seconds.
SNG110002 34,1°
dc one
ready
Mode 2
If the filter holder is attached to its support, DC-
ONE automatically recognises which dose to
supply.
In this mode, if the filter holder is removed from
its support before the grinding ends, the ground
coffee supply stops and the remaining grinding
time is kept in memory (the button of the inter-
rupted dose blinks as a reminder).
To cancel the remaining grinding time, just press
the blinking button.
3 seconds
1 - password
2 – grind adjustment
3 – dose programming
4 – burr cleaning
5 – counters
6 - reset
7 – settings
8 - alarms
9 - tests