Herunterladen Inhalt Inhalt Diese Seite drucken

Run Screen Opl - Fagor LA-11 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für LA-11:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 132
1. Machine identifier: Label identifying the machine.
2. Time: Time and minutes in the selected format.
3. Weight of clothes: The weight of the clothes in the machine is displayed (if the weighing kit is
active) or the nominal load for the selected model (if the kit is not active), and the weight of the
load entered can be edited. Option to enable/omit in HUD. Once the programme has ended or
been aborted, the nominal load of the machine is selected again.
4.
Main menu: Access to washing machine main menu, where the different machine
parameters can be configured.
5. Programme name: Name configured for the selected programme.
6. Programme temperature: Maximum temperature of the different cycles of the programme.
7. Programme number and length: Position of the programme in the list of programmes (My
Programmes), and the estimated length in minutes for the programme selected.
8. Increase/decrease programme number: Permits user to scroll up or down the list of selected
programmes. As well as using the buttons, the programme can be increased/decreased by
pressing directly on the programme information (just above the button).
9. Start: Button to start running the selected programme from the cycle indicated.
10. Programme cycles: Press on the selected programme, the programme cycles are displayed
and the cycle you wish to start with can be selected.
In addition, it is possible to configure a programme instantly, that is, change the parameters of a
cycle (time, temperature, level and dosage) for the current programme. These values are not
saved for future programme runs.

3.3 Run screen OPL

When START is pressed, the programme begins and all the relevant programme information is
displayed on this screen. Some of the options may be omitted from the HUD menu.
1
4
11
1.
Machine identifier: Label identifying the machine.
2.
Time: Time and minutes in the selected format.
3.
Programme running: Programme name, Programme number, Programme length.
2
3
10
6
5
12
8
9
7
EN
Page 5 of 43

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis