Chapter 7: Using The Machine; Safety Systems - Zhermack DOUBLEMIX Handbuch Für Gebrauch Und Wartung

MAINTENANCE AND USE MANUAL
The machine must not be used with any of its parts disassembled: before using the
machine make sure that all its components are properly in place.
To ensure that work is done in absolute safety always make sure that you follow the
described procedures with caution.
To provide greater clarity the numbers given in the diagrams in the following
paragraphs correspond exactly to the numbering in Chapter 3 in the "Machine
Description" section.
To ensure maximum reliability Zhermack uses only the finest raw materials and components; all
machines are put through stringent tests prior to delivery. All materials are of the finest quality and
are checked on delivery, during storage and when used in the factory so as to prevent any damage,
deterioration and/or malfunction.
All structural parts, connections and controls have been designed and built to very high safety
standards and are capable of resisting strains/overloads that are anomalous or in any case higher
than those given in this manual.
doublemix mixer also feature a safety fuse, designed to protect both machine and operator from
overloads.
Utilisation of the machine for any purpose other than that for which it has been
specifically designed is strictly forbidden. The manufacturer cannot be held liable
for any damages caused by improper use and/or utilisation for purposes other than
those stated in this manual.
DOUBLEMIX
EN

CHAPTER 7: USING THE MACHINE

WARNINGS

SAFETY SYSTEMS

113 of 188
7.1
7.2