Installing And Charging The Battery - Symbol WSS 1000 Kurzanleitung

W S S

Installing and Charging the Battery

The wrist computer and scanner are powered by a
Lithium-Ion battery pack. The pack provides power for
a typical 8-hour shift.
Note:
To install the battery pack in the WWC 1000:
1. Insert the battery pack, base first, in the battery
compartment.
Battery Pack
Base
2. Line up the pack's locking mechanism with the
notch in the battery compartment wall by sliding
the battery latch, and press the pack into place.
3. Release the battery latch to lock in place.
1 0 0 0
Before using the wrist computer, install and
fully charge the Lithium-Ion battery pack.
S y s t e m
Battery
Compartment
4
Battery
Latch
Notch