Description: Mf-Serie - EMAG Emmi-12HC Bedienungsanleitung

8. Description: MF-Serie

MF-SERIE: EMMI®-MF30, EMMI®-MF60
5
6
Startup
After the ultrasound has been started, the power can be adjusted to the following power levels:
40%/60%/80%/100%. For standard cleaning applications the unit should be powered at 100%.
Lower power levels can be used for more sensitive parts like jewelry or plastic. Afterwards, the timer
and heating can be set to the desired runtime and temperature. All options are displayed.
The "SWEEP" button can be used for different ultrasonic waves. Through these different waves,
additional cleaning ability can be generated.
With the button "20-40 kHz" the frequency can be changed.
At 40 kHz, the devise works with a HIGHER frequency range and a LOWER power range to clean less
soiled parts. The result is an intensive and gentle cleaning. At 20 kHz, the devise works with a LOWER
frequency range and a HIGHER power range to clean larger and heavier soiled parts. The result is a
powerful and residue-free cleaning. You can also see the frequency setting on the display. Through
the energy of the ultrasound waves and micro cavitation the device can heat up. This is normal and
does not affect the cleaning result.
20
13
1
9
7
1. Basket - stainless
2. Tub – stainless steel
3. Outlet valve
2
4. Display
5. Heating
6. Timer
7. Start/Stop
8. Sweep
9. Kilohertz setting
11. Performance regulation
12. ON/OFF
3
13: Cover – stainless steel
8
10
12
4