Description: Mf-Serie - EMAG EMMI-12HC Bedienungsanleitung

8. Description: MF-Serie

MF SERIE: EMMI® MF30, EMMI® MF60
5
6
7
Startup
After the Ultrasound was started the power can be adjusted in the following power levels:
40%/60%/80%/100%. For standard cleaning applications the unit is operated with 100%.
Lower power levels can be used for more sensitive parts like jewelry or plastic. Afterwards the timer
and heating can be set to the desired runtime or temperature.
All indications can be taken from the display.
The Sweep button can be used for different Ultrasonic waves. Through these different waves addi-
tional power increases are generated.
With the button "20-40 kHz" the frequency between the two frequencies can be changed.
With 40 kHz the device works with a higher frequency range and a lower power range to clean less
soiled parts. The result is an intensive and gentle cleaning.
With 20 kHz the device works with a lower frequency range and a higher power range to clean
larger and heavier soiled parts.
The result is a powerful and residue-free cleaning. You can see the frequency setting also on the
display.
Through the energy of the ultrasound waves and micro cavitation the device can heat up. These
procedure is normal and does not affect the cleaning result
20
2
1
9
8
10
12
1. Basket - stainless
2. Tub – stainless steel
3. Outlet valve
4. Display
5. Heating
6. Timer
7. Start/Stop
8. Sweep
9. Kilohertz setting
11. Performance regulation
12. ON/OFF
without image: Cover – stainless steel
3 3
4