Machine Settings - Zanussi THE 4750 Benutzerinformation

permitted ambient temperature
1) 7 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121

Machine settings

Setting
BUZZER permanent off
Water hardness
Water contains, a variable
quantity of limestone and miner-
al salts of which quantities vary
according to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sen-
sitivity of the drying sensor
based on conductivity values of
the water.
www.zanussi.com
+ 5°C to + 35°C
1. Turn the programme selector to any programme.
2. Press simultaneously the
buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off.
1. Turn the programme selector to any programme.
2. Press simultaneously the
PAUSE buttons and hold down for approx. 5 seconds. The current
setting is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3. Press the
START/PAUSE button sequentially until you set de-
sired level.
4. To memorize setting press simultaneously the the
and START/PAUSE buttons or turn knob to OFF position
Implementation
INTENSIVE and
ANTI-CREASE and
ANTI-CREASE
START/
ANTI-CREASE
63