Cisco Linksys WRT54GS Kurzanleitung Seite 8

3
Configuring Wireless Security
The Router comes equipped with six
types of Wireless Security: WPA
Personal, WPA Enterprise, WEP , WPA2
Personal, WPA2 Enterprise, and
Radius. These security methods are
not enabled right out of the box,
however. To configure wireless
security on the Router, do the
following:
A
Open the Router's Web Utility as
shown in Step 2, and click the
Wireless tab. The Basic Wireless
Settings screen will appear.
B
Select Wireless Security to
configure wireless security on the
Router.
Directions for the configuration
of WEP , WPA Personal, and WPA2
Personal wireless security are
provided here.
C
From the Security Mode pull-
down menu, select the type of
wireless security you'll use on
your network.
WEP: WEP is a basic encryption
method, which is not as secure as
WPA. To use WEP , select a Default
Transmit Key (choose which Key to
use), and a level of WEP encryption,
64 bits 10 hex digits or 128 bits 26
hex digits. Then either generate a
WEP key using the Passphrase or
enter the WEP key manually.
8
NOTE: If your wireless adapters
support Secure Easy Setup (SES), you
can use the SES button on the Router
to set up Wireless Security.
Basic Wireless Settings
NOTE: Please refer to the User Guide
if you wish to configure WPA
Enterprise, WPA2 Enterprise or
Radius wireless security options.
WEP Security Settings