Operation - OHAUS EX124 Anleitung

EN-4
2.9 Connecting Power
AC Adapter Installation (only certain models)
Connect the AC adapter to the instrument's power input connector, and then connect the AC plug to a suitable electrical outlet.
Attention: Only use an AC adapter specified by OHAUS.
Attention: For optimal weighing performance, allow the
balance to warm up for 60 minutes prior to use.
2.10 Connecting the Interface
Use the built-in RS-232 (10101) Port to connect either to a computer or
a printer with a standard (straight-through) serial cable. Or connect
using the scale's USB ports.
.
2.11 Leveling the Equipment
To level the instrument, adjust the feet/leveling wheel so the bubble is centered in
the circle of the level indicator. Be sure the equipment is level each time its location
is changed.
2.12 Initial Calibration
For best results, the instrument's calibration should be checked prior to first use. If adjustment is needed, refer to the
Calibration section of the instruction manual.

3. OPERATION

3.1 Overview of Display, Home Screen
This equipment utilizes a touch-sensitive display. Touch areas and Buttons to control the equipment's functions.
CONTROLS
Instructional Messages
Stability (*), Net (NET),
Gross (G) and/or center of
zero (>0<) indicators
Result Fields: Information
varies by application
Touch icons to perform
specific functions or access
other functions
Touch to access application setup menu
Touch to
change
applications
Interface connections inside of the Terminal.
Touch to access
available libraries
EXPLORER BALANCE
Touch for information
menu
Touch unit indicator to
change weighing unit
Capacity or Status
Guides:
Vary by application
Application Buttons:
Functions vary by
application