Conformity Declaration - Rupes TA151A Bedienungs- Und Wartungseinleitung

TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1 - Type of tool
2 - Working pressure
3 - Orbital diameter
4 - Maximum abrasive paper velcro disc diameter
5 - Air consumption at full power
6 - Maximum rpm
7 - Tool code number or serial number
6
5
4
3
1
2
7

CONFORMITY DECLARATION

We declared on our responsability that the hand-held non-electric
power tool, which is mentioned in the present operating manual, is in
comformity with the Essential Requirements of Safety of the following
Directive:
2006/42/CE Machine
The tests have been carried out in accordance with following Standards:
UNI EN ISO 11148-8:2012 - UNI EN ISO 15744 - UNI EN ISO 28927
Technical file at:
RUPES S.p.A.
Via Marconi, 3A
20080 VERMEZZO (Mi) - Italy
Vermezzo (MI), 03/02/2014
S.p.A
IL PRESIDENTE
G. Valentini
11