Connection Overview; Connecting To Your Pc - Silvercrest SVG 2.0 A2 Bedienungsanleitung Und Serviceinformationen

SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 English

Connection overview

Connect the adapter (5) to the Video Grabber (1). Put the connection adapter into the socket at the
back of the Video Grabber (see diagram).
Video Grabber
Connector Adapter
2
Snapshot Button
S-Video input
Stereo Audio input (white/red)
Composite Video input (yellow)

Connecting to your PC

In order to record using the Video Grabber you must first install the software. If you haven't already
done so, go to the chapter entitled 'Installing the software' and follow the instructions.
 Connect the adapter (5) to the Video Grabber (1) as shown in the earlier illustration.
2
This button generates a snapshot (photo of the current video) when the recording mode of the
enclosed 'Power Director' software is activated.
21