Preface; Manufacturer / Supplier; Service & Maintenance; Definitions: User / Operator / Engineer - Heras HMD Basic HMD24 Betriebshandbuch

1 PREFACE

1.1

MANUFACTURER / SUPPLIER

Manufacturer:
Technical Construction File:
1.2 SERVICE / MAINTENANCE
In the event of problems, failures or questions you can contact:
Heras Netherlands
Heras Germany
Heras England
Heras France
Heras Norway
Heras Sweden
1.3

DEFINITIONS: USER / OPERATOR / ENGINEER

User: Anyone using the gate.
Operator: A user who is familiar with all safety aspects dealt with in this manual. Operators
are not allowed to carry out any installation work on the gate unless explicitly
specified.
Engineer: The engineer is a Heras fitter (or an engineer employed by the customer who
has been given explicit permission in writing from Heras) who is qualified to
perform technical interventions on the gate.
1.4

PRESCRIBED USE / APPLICATION

Only the correct installation and maintenance by an authorised/qualified company or person in
agreement with the user manual, logbook, checklists and maintenance lists can ensure the safe
operation of the system.
EN Rev.: 05 September 2017 – short version -
Heras B.V.
Hekdam 1, 5688 JE Oirschot
Netherlands
Tel.: +31(0)499-551225
www.heras.com
Heras B.V. manager, T&I Department
Telephone +31(0) 499 551 255
Telephone +49(0) 2872 94980
Telephone +44(0) 1302 364 551
Telephone +33(0) 3 88 067 000
Telephone +47(-) 22 900 555
Telephone +46(0) 77 1506050
5