Foreword - Heras HMD Basic HMD24 Betriebshandbuch

FOREWORD

This manual enables you to operate and maintain the sliding gate correctly. Possible options
are briefly described. The Operation chapter explains the control unit. Among other things, it
describes how you can change various settings.
This manual is a short version. A full version is available on request.
Please read this user manual carefully before using the sliding gate.
Store the manual in a safe place to be able to refer to it later if required. This description is
intended for the operator of the gate. The installer uses a separate manual to assemble and
install the gate.
The installer uses an installation scheme for the drive concerned and works according to the
applicable standards. In the event of a fault, you should contact a Heras certified technician.
EN Rev.: 05 September 2017 – short version - 4