Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CLEANING AND STORING
Clean the unit and all applicators each time after each use.
Do not use any alcohol, acetone, petrol, abrasive cleaning agents etc, to clean
the plastic parts.
1.
Rinse applicators with tap water no hotter than 50° C or 122° F.
2.
Rinse the brushes thoroughly, including the inside parts to remove any
residue.
3.
Tip: If the filaments have become deformed, you can restore them to their
original shape by soaking them in warm water.
4.
Use a damp cloth to remove any residue remaining on the unit
5.
Allow all the parts to air dry
6.
Store the unit and parts in the box for next usage.
IMPORTANT: If the unit is not to be used for a long time, make sure to remove
the batteries.
MAINTENANCE AND REPLACEMENTS
Replace the brushes every 2 to 3 months for good cleansing and exfoliation results.
Replace the brush if the deformed filaments can no longer be restored to their
original shape. Worn filaments will move impurities around rather than remove
them. They could also irritate your skin.
Werbung
Inhaltsverzeichnis
