Charging The Battery - Peaq PPA301BT-B Bedienungsanleitung

ENGLISH
Operation
TURNING ON/OFF
To turn on, press and hold the
ton for approx. 1 second. Press the
button until the speaker turns off.
ADJUSTING THE VOLUME
Press and hold the button
adjust the volume.

Charging the battery

1. Connect the USB cable (included)
to the speaker.
2. Connect the other end of the USB
cable to the USB port of the com-
puter or a USB-charger.
3. During the battery charging the
on/off button flashes continuously.
Operation indicator
• On/Off button
Flashes
charging.
Turns off: Battery charging com-
plete.
Note:
It will
(PPA201BT-B)/ 3 hours (PPA301BT-
B) to be fully charged the battery.
• Bluetooth
Flashing: Ready for Bluetooth
pairing.
Continously on: Paired with a
Bluetooth
26
_PPA201BT-B_PPA301BT-B_190412_V03_HR.indb 26
or
continuously: Battery
take approx. 2
button
®
device.
®
Bluetooth
PAIRING
1. Press the
but-
sounds and the
The speaker is ready for pairing.
2. Activate the Bluetooth
on the audio device. Connect the
to
Bluetooth
speaker via Bluetooth
3. A short melody will indicate that
both devices are successfully
paired. All buttons lights on for
few seconds.
4. Unpair at the Bluetooth
to disconnect. A sound indicates
that the Bluetooth
Alternative you can unpair both devic-
es by pressing the Bluetooth
for approx. 3 seconds.
Both devices are unpaired. You need
to unpair the devices before pairing
another device with the speaker.
Note:
hours
• Keep the range of 1 meter when
pairing.
• Up to 10 meters reception range
while music playback via Bluetooth
• Before pairing a Bluetooth
®
source, refer to the AV source user
guide regarding safety instructions
and use with other devices.
®
button until a sound
button flashes.
function
®
-AV-source with the
®
pairing.
®
source
®
is deactivated.
®
button
®
®
.
®
AV
12/4/19 3:30 pm