Before First Time Use; Charging The Battery - Peaq PPA401BT-B Bedienungsanleitung

ENGLISH

Before first time use

• Read this user guide carefully to
avoid damages or injuries due to
improper use. Pay special attention
to the safety instructions. Keep the
instructions for future reference and
include them when transferring the
device to third persons.
• The device must be charged be-
fore the first use. Please refer to the
chapter "Charging the battery".
• Carefully
materials and check the device for
completeness and integrity. Do not
use a damaged device.
• Pair the speaker with a Bluetooth
AV source or Bluetooth
phone first. Please refer to the chap-
ters "Pairing".
• The Bluetooth
PPA401BT-B
Operation
TURNING ON/OFF
To turn on, press and hold the
ton for approx. 1 second. Press the
button until the speaker turns off.
ADJUSTING THE VOLUME
Press and hold the button
adjust the volume.
26
_PPA401BT-B_190412_V02_HR.indb 26
remove all packaging
mobile
®
Speaker ID is
®
or

Charging the battery

1. Connect the USB cable (included)
to the speaker.
2. Connect the other end of the USB
cable to the USB port of the com-
puter or a USB-charger.
3. During the battery charging the
on/off button flashes continuously.
The LED indicator shows the charging
status. Once the charging is complet-
ed the LED indicator will be steady.
Note:
• DO NOT plug in the USB-cable on
the USB output port to charge the
®
powerbank.
• FAST CHARGE IS NOT ALLOWED.
• During charging, do not connect
any device to the powerbank.
Operation indicator
• On/Off button
Flashes
charging.
Turns off: Battery charging com-
plete.
but-
Note:
It will take approx. 3.5 hours to be
fully charged the battery.
• Bluetooth
to
Flashing: Ready for Bluetooth
pairing.
Continously on: Paired with a
Bluetooth
Battery
continuously:
button
®
device.
®
®
12/4/19 3:52 pm