First steps
Channel Search
Delete All
This operation will delete all satellite positions. This item is only valid in "DiSEqC1.2" mode.
Limit Setup
You can set the East/West limit. Select the East Limit or
West Limit by the
/
button. Then highlight the Limit
setup item and move the dish to west or east by
pressing the
/
button. Once having reached the
target place, press the OK button to set the limit.
If you want to disable the limit , select the Disable Limit,
then highlight the Limit setup item and press the OK
button to disable the limit.
You also can move the dish to a position given as
reference. Highlight the GO to Reference and press the
OK button, then the dish will move to the reference
position.
ENG26