Xoro HRS 8750 CI+ Bedienungsanleitung Seite 66

Channel Search
22 kHz
By using the 22 kHz signal combined with a universal LNB it is possible to receive the whole ASTRA-
satellite system (analogue & digital) with a single 60cm satellite dish. For receiving digital TV and
radio only a Set-Top-Box is needed. The digital TV programs are all arranged in the higher frequency
band -> use the option AUTO
Polarity
Here you can set the polarization. Please uses the setting "Auto". This then will both areas (horizontal
and vertical) will be searched. Otherwise, the
search is only one of two orientations. You can
not then find all the channels.
Recommendation: Use the option Auto!
Then you can enter search menu (Single
satellite search/Multi
search) after antenna setting. Highlight on the
"Search" option, and then press the OK button to
start scanning.
In search menu , you can specify additional
search parameters. These are
individual with the options:
FTA Only: No, Yes
Scan Channel: TV+Radio, TV channel Radio
Network Search: No, Yes
Scan Mode: Auto Scan, Accurate Scan, Present Scan
FTA Only
Here you can specify whether you want to receive from the only FTA channels or
all (including Pay TV) channels. If you want a subscription card in the Receiver, then you should
select "No".
Scan Channel
Here you can specify a type among TV+Radio, TV channel and Radio.
Network Search
Here you can specify whether you want to receive from the search of network or not
If you want to search network, then you should select "Yes".
Search method
In the search mode you can choose among Auto scan, Accurate scan and Present scan.
For Auto scan, the device has stored for each satellite, a transponder list and it is searching at this
list.
ENG20
First steps
satellite search/TP