Parts Information; Operator Panel; Output Trays (5300N Only) - Rimage Professional 5100N Benutzerhandbuch

Rimage Professional 5100N and 5300N User Guide

Parts Information

Operator Panel

The operator panel has a two-line display that informs you of operations or any
conditions that require operator intervention.
The Professional displays the name of the embedded PC or product name after
it initializes. Refer to the
options.

Note: The caret symbol '^' in the upper right corner of the display indicates
that the Rimage software is currently communicating with the system.

Output Trays (5300N only)

The 5300N is configured with five output trays. When a disc is recorded and
printed, the lift arm moves the disc to the output bin or one of the output trays.
The disc slides out to the end of the tray. The sensor located on each output tray
detects if a disc is present in the output tray. The output trays are numbered 1-5,
with 1 located at the top.
Output Trays
(5300N only)
11
Operate Gemini Utilities
Operator
Panel
section on page 27 to see other
2000447_E