Output Bin; Beeper - Rimage Professional 5100N Benutzerhandbuch

Output Bin

The output bin receives completed and failed discs. The output bin holds up to
100 discs.

Note: Each time you fill the input
bins, remove the completed discs
from the output bin so the output
bin does not become full.
To remove discs from the output bin,
pull the bin latch forward. The output
bin swings forward.

Note: Only the 5300N is equipped
with a bin latch. The 5100N output
bin does not swing open.
To return the output bin to its original
position, close output bin until you
hear it snap in place.

Beeper

The Professional has a beeper that sounds when user intervention is required.
Read the condition on the operator panel or at the client application and take
appropriate action to correct the problem. To stop the beeping, open the door.
To change the number of beeps or to disable the beeper, refer to the
Beeper section on page 28.
2000447_E
Identify the Parts of the Professional
Bin Latch
(5300N only)
Output Bin
Enable the
12