3.10 Installation - Rf Installation - Radson Tempco touch CP W Bedienungsanleitung

3.10 Installation – RF installation
Use this menu to link with your central unit all wireless equipment
installed in your house.
You will find in the list all types of equipment compatible with your
central programmer.
RF Installation – Outside Sensor
The outside sensor will be used to anticipate the temperature
influence due to the external weather.
a) To link the Outside sensor with your main zone programmer
press on the "Outside sensor" button, and follow this rule,
b) Open the Outside Sensor box and press on the RF init
button, the RF Led should blink, first in Red followed by a
Green LED to indicate the correct link.
In the same time on the Central the following screen must
appear:
st
1 Page
30