Sunred UTH15 Bedienungsanleitung Seite 3

Assembling Process
Step 1: Fix the Heater Pole on the base by using the provided 3PCS of M6*25mm screws.
Complete!
Caution
Only use the heater on a firm solid horizontal area where all the feet on the base are in contact with the
floor. (Should the heater be tilted or fall over the auto cut off switch will activate)
1. Site the heater outside or in a large open area and well away from any obstructions such as
branches or where the heater is near any objects that can be effected by heat, such as furniture,
curtains or other inflammable objects (minimum distance 1 meter).
2. Do not use near bath tubs, wash areas or swimming pools.
3. Do not use in unventilated areas
4. Do not use where gas, petrol, paint or other inflammable goods are stored.
5. Do not push any items through, obstruct or cover the grill of the heater head.
www.sunred.nl