Axis 210 Montageanweisung Seite 4

Page 4
Underside
Connections
1. Connect the network camera to your network using a standard network cable.
2. Connect power, using one of the 3 supported methods listed below:
• The supplied power adapter.
• PoE (Power over Ethernet) via the network cable (AXIS 211/AXIS 211A only). This will
automatically be detected if available via the network.
• The I/O terminal connector on the rear panel.
Important!
To use the network camera outdoors it must be installed in an outdoor enclosure. For more information on
outdoor enclosures, please visit www.axis.com
Rear panel AXIS 210/211
DC-Iris control cable
(AXIS 211)
Internal
microphone
(211A only)
Serial number
Control button
Power indicator
Network indicator
DC-Iris control cable
External
microphone/line input
AXIS 210/211/211A Installation Guide
Power connector
Rear panel AXIS 211A
Audio output
Network connector
and PoE
I/O terminal
connector
Network connector
(and PoE for AXIS 211)
I/O terminal
connector
Power connector