Installation Steps; Package Contents - Axis 210 Montageanweisung

AXIS 210/211/211A Installation Guide
Network Camera Installation Guide
This installation guide provides instructions for installing the AXIS 210/211/211A Network
Camera on your network. For other aspects of using the product, please see the
AXIS 210/211/211A User's Manual, available on the CD included in this package, or from
www.axis.com

Installation steps

Follow these steps to install the network camera on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the network camera. See page 4.
3. Set an IP address. See page 5 for information on the available methods.
4. Set the password. See page 9.

Package contents

Item
Network camera
Power adapter
Camera stand
I/O terminal connector
CD
Printed materials
Overview
AXIS 210
Status
indicator
AXIS 210/211/211A
Notes
AXIS 210/211/211A
Country-specific
Supplied with mounting screws
4-pin I/O terminal connector - 1 transistor output, 1 digital input, auxiliary power and GND
Installation tool and other software, product documentation
• AXIS 210/211/211A Installation Guide (this document)
• Axis Warranty Document
Status
indicator
Focus puller
AXIS 211/211A
Tele/wide puller
DC-Iris
Page 3
Control
cable