VESTEL VEB26016 Bedienungs- Und Installationsanweisungen Seite 44

4.4 USE OF OVEN PART
Setting and using the oven programmer/timer
Selecting manual operation mode
''Minute Minder''
symbol
''Manual operation''
symbol
Setting the time of day
After setting your oven for manual operation, you should also set the time of day. Use the
"minus" button and "plus" button to adjust the time that appears in the display.
After getting display to the correct time, release the "minus" and "plus" buttons. After 5
seconds the time will fix in the display you will be able to use your oven.
Setting the minute minder function
You are able to set minute minder at any time, regardless of whether an oven function has
been selected. You can set a period of time using the minute minder function and an alarm
will sound when this period of time has elapsed.
Press the "mode" button once, the display will show a value of 00:00 and "minute minder
symbol". Set the period of time that you wish the minute minder to countdown for, by using
the "minus" and "plus" buttons.
Once the display has got to your desired countdown time, let go of the "minus" and "plus"
buttons. The minute minder symbol will appear on the time display. Once a countdown time
has been set, it is possible to shorten or lengthen the time by using the "minus" or "plus"
buttons after pressing "mode" button once.
An alarm will sound when the countdown time has elapsed. The alarm can be silenced by
pressing the "mode" or "plus" or "minus" buttons.
Setting the duration function
This function will allow you to set a countdown time similar to the minute minder function.
However the oven will no longer continue to heat, once the countdown period has elapsed.
Use the thermostat control knob to set the temperature and oven function selector knob to
select mode of cooking that you require. The manual operation symbol will appear on the
display. It is then possible to set the duration of the cooking time that you require. Press the
"mode" button twice (until you see "dur" on display) and the display will show a value of
00:00. Set the period of time that you wish the duration function to countdown for, by using
the "minus" and "plus" buttons. Once the display has got to your desired countdown time,
let go of the "minus" and "plus" buttons. The countdown will start immediately and the word
A will appear on the time display. Once a countdown time has been set, it is possible to
shorten or lengthen the time by using the "minus" or "plus" buttons after pressing "mode"
button twice.
An alarm will sound when the countdown time has elapsed and the oven will switch off.The
word A will flash and the heating symbol will disappear. To silence the audible signal and
After your appliance is connected to your mains
supply for the first time, the numbers on the timer
display will flash. Before you can select a cooking
function or set a temperature, you must set the
appliance into "manual operation" mode. To select
manual operation mode, press the "minus" or
"plus" button on the control panel while oven
function switch is at "0" position.
''Auto'' function
symbol
15