Midland G9 Bedienungsanleitung Seite 35

Your Midland G9 Plus keeps you constantly updated about its operatio-
nal status through a Liquid Crystal Display (LCD). The symbols and their
corresponding parameters that may appear, according to the operational
status of the device, are described as follows:
1. CHANNEL
VOX
2.
3.
EMG
4.
DW
5.
20
6.
7.
8. OUT
21
9. RX
20
22
10. TX
23
24
11. H(High) / L(Low) High or low power selection. The output power
15
12. CTCSS/DCS
21
13. CTCSS/DCS tone These three small digits indicate the code of the
22
23
24
14. ROGER
15
Midland G9/G9E Plus instruction guide
These two large digits indicate the selected
channel
VOX function activated
This symbol appears when the keypad lock is
activated
Emergency function activated
Dual Watch activated
Indicates the battery status
Vibra-Call function activated
Indicates if the Automatic Out of Range function
looses contact with the other radios
Reception mode
Indicates the transmission (PTT pressed)
of the big PTT depends on your selection
Indicate the type of sub audio tone selected
CTCSS/DCS tones selected (1-38 / 1-104)
Roger Beep activated
| 9