Rimage 2000i Series II Handbuch Seite 15

Operate the Rimage 2000i Series II
3. Check the ink cartridge alignment.
a. From the Preferences window, select the Service tab.
b. Select Service ToolBox. The Service ToolBox dialog box opens.
c. Select Align Cartridges. The Align Cartridges for Disc Color Printer
480i dialog box opens.
d. Follow the onscreen prompts to complete the alignment.
e. When the alignment is complete, select OK. The Align Cartridges for
Disc Color Printer 480i dialog box closes.
4. Select OK. The Preferences window closes.
5. Press . The printer tray closes.
Center the Image on the Disc
The Rimage 2000i provides two ways to center the image on the disc. You
can use the Auto Centering method or the Manual Centering method. The
following procedure describes both methods. The Auto Centering method
is accurate to within +/- 0.5 mm. You can improve the centering position
accuracy with the Manual Centering adjustment to better than +/- 0.2 mm.
Tip: Use the Center Image functionality only if the printed image is not
centered on the disc. Image centering is set by the manufacturer and usually
does not need to be recalibrated in the field.
For optimal print quality, use the following procedure to center the image on
the disc.
Access Printing Preferences. Refer to page 9.
1.
2. Press . The printer tray opens.
3. Place a 120 mm white disc (Qty. 1) on the tray.
4. On the Service tab, select Service ToolBox. The Service ToolBox dialog
box opens.
2002760_A
5. Select Center Image. The Centering Margins for Disc Color Printer 480i
6. Follow the onscreen instructions to use either the Auto Centering or the
7. When the image is centered, select OK. The Centering Margins for Disc
8. Select OK. The Rimage Service ToolBox dialog box closes.
9. Select OK. The Preferences window closes.
10. Press
Check the Ink Levels
This functionality allows you to check the current levels of ink in the
cartridges.
Tip: If you remove the ink cartridges and reinsert them, the system resets to
show that the cartridges are full, regardless of the actual fill status.
1.
2. On the Service tab, select Service ToolBox. The Service ToolBox dialog
3. Select Get Ink Level. Ink level information displays in the Printer Status
4. Select OK. The Rimage Service ToolBox dialog box closes.
5. Select OK. The Preferences window closes.
For more information visit rimage.com/support
dialog box opens.
Manual Centering method.
Color Printer 480i dialog box closes.
. The printer tray closes.
Access Printing Preferences.
Refer to page 9.
box opens.
field.
12