Technical Specification; Selection Of Installation Equipment - SCAN domestic K 62 Bedienungsanleitung, Montageanleitung

Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size
Building-in Dimensions
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Installation

Selection of installation equipment

Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by
the heat radiation from the hotplate. As shown below:
L(mm) W(mm)
590 520
Under any circumstances, make sure the ceramic cooker hob is well ventilated
and the air inlet and outlet are not blocked. Ensure the ceramic cooker hob is in
good work state. As shown below
L×W×H(mm)
A×B (mm)
H(mm) D(mm)
55 51
14
K 62
4 Zones
220-240V~
6000-7000W
590X520X55
560X490
A(mm) B(mm)
+4
560 490
+1
X(mm)
+4
50 mini
+1