Remote Control Functions - Dirna Mini cool COMPACT Benutzerhandbuch

F5 Automatic Operation of the unit, maximum power with the engine
EN
stopped. Maximum time, 60 minutes (accumulative)
When selecting F5 the selected comfort temperature appears on the Display.
The user can choose the comfort temperature manually. With this function, the unit regulates au-
tomatically its performance parameters until the chosen comfort temperature is achieved.
Default duration of 30 minutes is established when activating this F5 mode.
The user will have 60 minutes if, once the F5 function is enabled, the
Remote control

Remote Control Functions:

1
Unit On / Off
Note: when this Key is pushed, the unit starts in
automatic mode F4 / P4
2
Blower speed control (manual mode only)
Note: while the unit is working in automatic mode F4 / P4, if the
user press this key, the unit will change the working mode to manual
F0 / P0. This allows the user to choose the desired air flow by
pushing this key and the following symbols will appear on the
display: V1, V2, V3, V4, V5, V4, V3, V2, V1
3
Temperature control
The comfort temperature is controlled by briefly pressing the + / -
keys (15/ 27 ºC)
To release the remote control:
To release the remote control; with the unit stopped, keep pushed the key
panel. The symbol C
the On/ Off key before 30 seconds and the unit will emit an acoustic signal. In case this does not
happen, this operation will need to be repeated from the beginning.
will appear blinking in the display. When this symbol stops blinking, push
10
key is pressed.
1
2
.
from the control
3