Bosch VMD01-M60 NTSC Bedienungsanleitung Seite 6

2.1.2 Wall holder
Holes for
strain relief
The wall holder can be used as a drilling template. Before mounting on a wall,
screw the wall holder (using fitting holes for housing) to the unit. For strain relief
using cable ties, use the holes in the mounting plate.
Warning!
Only one unit may be mounted on a wall or ceiling.
2.1.3 Connections / Front
1 L1 green
3 Key/Rotary Switch
2.1.4 Connections / Rear
1 5V DC
3 Video OUT
Mounting continued
for mounting on walls and ceilings (accessory VMD–WM)
TOP
Mounting holes
for housing
3
4
1 2
2 L2 red
4 Mouse connection, RS232 serial interface
1
2 1
6
11
2 I/O Contacts
4 Video IN
– 6 –
TOP
Holes for
strain relief
3 4
A1 February 03/Trb
English