Oki LD630T Bedienungsanleitung Seite 18

3-4-4 Knob Adjustment by Ribbon Length
Ribbon lengths of 74m, 100m (0.5" core), and 300m (1" core) can all be used with this
product. Adjust the knob accurately according to the ribbon length (74 ~ 300 m).
Exercise care as print quality and operation can be affected.
 The product is shipped with a default
setting for a ribbon length of 300m
(1" core). To use a 74m (0.5" core)
ribbon, adjust (rotate) the knob in the
direction of 74m prior to use.
 When the cover is outside the knob
as shown in the image A, the ribbon
length is set to 74m. If the cover is
inside the knob as shown in Image
B, the ribbon length is set to 300m.
Knob
Cover
■ Knob Adjustment
- Grasp the ribbon while it is fitted and rotate the knob as shown in the image.
Knob
Rev. 1.0
Image-A (74m)
- 18 -
LD630T/LD640T
Ribbon
Image -B (300m)