Oki LD630T Bedienungsanleitung Seite 17

3-4-2 Inserting a One - Inch Ribbon Core Adapter
1) Insert the ribbon core adapter into the new ribbon core and the used ribbon take up
core. (keep note of ribbon printing direction)
Ribbon Core Adapter
2) Open the ribbon assembly and insert the
ribbon and core by pushing from left to
right.
4) Press on both sides of the ribbon assembly to close it for printing.
3-4-3 Inserting a Half-Inch Core Ribbon
1) Open the ribbon assembly and insert the
ribbon and the used ribbon take up core
by pushing from left to right. (keep note of
ribbon printing direction)
3) Press on both sides of the ribbon assembly to close it for printing.
Rev. 1.0
Core (one-inch)
- 17 -
3) Apply tape to the leading edge of the
ribbon and fasten it to the used ribbon
take up core.
2) Apply tape to the leading edge of the
ribbon and fasten it to the used ribbon
take up core.
LD630T/LD640T
Tape
Tape