Color Return - Restoring The Color Image; Moire Adjust - Adjusting The Moire - Dell UltraScan P990 Benutzerhandbuch

COLOR RETURN - Restoring the Color Image

The color of most display monitors tends to gradually lose its brilliance after several years
of usage. The Color Return feature allows you to help restore the color to the original fac-
tory preset levels.
To restore the image, first press the
select
, button.
A white rectangle appears in the center of the screen
while the image is being restored (about two seconds).
NOTE: Before using this feature, the monitor must be in
normal operation mode (Green power indicator) for at
least 30 minutes. If the monitor goes into power saving
mode, you must return the monitor to normal operation
mode and wait for 30 minutes for the monitor to be
ready. You may need to check your computer's power
saving settings to help keep the monitor in normal oper-
ation mode for the full 30 minutes. If the monitor is not
ready, the following message will appear.

MOIRE ADJUST - Adjusting the moire

Moire is a type of natural interference which produces soft, wavy lines on your screen. It
may appear due to interference between the pattern of the picture on the screen and the
phosphor pitch pattern of the monitor.
1-10 Dell Model UltraScan P990 Color Monitor User's Guide
(COLOR RETURN). Then press the right 6
Example of moire
m/M buttons to
OPTION
COLOR RETURN
OPTION
COLOR RETURN
ON
AVAILABLE
AFTER
WARM UP