Setup
Setup
1.
Make sure the computer system and monitor are switched off and attach
the Blue video signal cable to the Blue video output of the computer.
Both are a Blue color
2.
Make sure the monitor is switched off and attach the power cord to the
monitor. Then, attach the other end of the power cord to a power outlet.
to an AC power outlet
3.
Switch on the monitor and computer.
4.
Adjust the user controls according to your personal preference.
Installation is complete.
NOTE: If you have any problems with your Dell Monitor, refer to the "Troubleshooting"
section on pages 1-15 to 1-19.
Computer
Video
Signal cable
Power cord
to the video output
connector on the computer
Video Signal Cable
Setup
1-3