Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

English
Differential circuit breaker
The controller is equipped with a differential
circuit breaker to protect the operator from
electric shock.
A differential circuit breaker in the power supply
to the controller detects any insulation defect
between the phases of the network and the earth
and immediately cuts off the power supply.
Fuse
The fuse on the electronic board is a 1Amp/slow
blow 250V BK/ETF1A from Bussmann.
This fuse should only be changed by qualified
service personnel. Replace only with a fuse of
same reference.
Tool care and service
Only experienced and qualified
personnel (authorised electricians) are
entitled to open and have access to the
inside of the controller.
If in doubt, return the tool to a Desoutter-
authorized service centre (contact your local
Desoutter Sales for details).
Disconnect from power supply and wait
10 minutes before commencing service
operations.
Failure to wait 10 minutes may result
in electric shock from undischarged
capacitors.

INSTALLATION

(See page 5).
The controller should be installed in such
a way that it should be easily switched
off.
Although our cables are designed
to work under drastic conditions, we
recommend that you check the following
points for longer service life:
● Bending radii should not be lower
than 10 times the cable diameter
(D-c).
● Friction with the outer sheath should
be restricted (D-b).
● Any direct pull on the cable should be
avoided (D-a).
DESOUTTER TOOL AND ACCOUNT
SERVICES
From the installation and set-up to the full life
cycle of your product, we offer a wide range of
products to keep your equipment and processes
operating at maximum levels.
Consult your local Desoutter Customer Service
Center to find out how we can deliver a lifetime of
Peace of Mind™ and optimal operation.
12/2014
DESOUTTER WARRANTY
1 This Desoutter product is warranted against
defective workmanship or materials, for a
maximum period of 12 months following the
date of purchase from Desoutter or its agents,
provided that its usage is limited to single shift
operation throughout that period. If the usage
rate exceeds that of single shift operation, the
warranty period shall be reduced on a prorata
basis.
2 If, during the warranty period, the product
appears to be defective in workmanship or
materials, it should be returned to Desoutter
or its agents, together with a short description
of the alleged defect. Desoutter shall, at its
sole discretion, arrange to repair or replace
free of charge such items as are deemed
faulty by reason of defective workmanship or
materials.
3 This warranty ceases to apply to products
which have been abused, misused or
modified, or which have been repaired using
other than genuine Desoutter spare parts
or by someone other than Desoutter or its
authorized service agents.
4 Should Desoutter incur any expense
correcting a defect resulting from abuse,
misuse, accidental damage or unauthorized
modification, they will require that such
expense shall be defrayed in full.
5 Desoutter accepts no claim for labour or other
expenditure made upon defective products.
6 Any direct, incidental or consequential
damages whatsoever arising from any defect
are expressly excluded.
7 This warranty is given in lieu of all other
warranties, or conditions, expressed or
implied, as to the quality, merchantability or
fitness for any particular purpose.
8 No one, whether an agent, servant or
employee of Desoutter, is authorized to add to
or modify the terms of this limited warranty in
any way.
15 / 100
6159933490_03

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cvil ii mCvil ii s

Inhaltsverzeichnis