Troubleshooting - Klarstein Antarctica Handbuch

TROUBLESHOOTING

Fault
Ice machine does not
work
The machine stops 3
minutes after it's turned on
The machine can only
make one tray of ice every
time it is turned on
Ice could not fall off the
ice tray
Possible Cause
Not connected to the
power supply or water
supply.
Ice tray baffle remains
open.
High Voltage Protection
Ice full or ice tray baffle
remains open
Dirty Ice Tray
Machine not placed on a
level ground
Environment temperature
is too low
Faulty Solenoid valve
Check the following:
1. fuses 2. power switch
3. cable 4. water switch 5.
power plug 6. sockets
If the ice tray baffle
could open and close
automatically
High temperature
environment
Dirty condenser filter
Damaged fan motor
If the ice tray baffle
could open and close
automatically
cleaning and disinfection
needs to be done
Adjust the machine to a
level ground
Environment temperature
should be higher 5°C
Replace the solenoid valve
EN
23