Cleaning And Care - Klarstein Antarctica Handbuch

Scheduled shutdown
1. In ice making mode, press the TIMING button. The „Timed" display is illuminated
and shows the remaining ice production time in hours.
2. Adjust the remaining time by pressing the +/ - buttons.
3. Press the TIMING button again to deactivate the automatic shutoff.
Full ice container
1. When the ice container is full, no additional ice can get in and the machine switches
off automatically.
2. After ice has been removed from the container, it takes 3 minutes for the machine to
restart automatically.
Note: As a result of voltage and pressure fluctuations caused by the ice machine
stopping, the ice fall can be delayed. Only after 5 minutes switch off the power
supply and then test the machine. Due to changes in the water temperature and the
ambient temperature, it may happen that ice cants in the container. Turn off the unit for
10 minutes and then turn it on again.

CLEANING AND CARE

Cleansing function
1. Press the CLEANING button for 3 seconds in standby mode. The unit switches to the
cleaning mode, the water valve opens, the water level rises to the required level,
the pump opens. The cleaning time is 30 minutes, the time flashes on the screen.
After cleaning is completed, the water valve opens again to ensure the required
water level. The device then returns to standby mode.
2. During the ice making process, the machine goes through 10 cycles before
cleaning for 20 seconds (the cleaning interval may vary on some models).
EN
21