Werbung
5.4 Monitoring via headphones
Via headphones connected to one of the jack
PHONES (16) the mixer output can be monitored.
Adjust the headphone volume with the control
LEVEL (15).
Caution! Never adjust the headphone volume
very high. Permanent high volumes
may damage your hearing! The human
ear gets accustomed to high volumes
which do not seem to be that high any
more after some time. Therefore, do not
further increase a high volume which
has once been adjusted after getting
used to it.
The headphone volume is independent of the output
level controls (14). Thus, it is possible to monitor the
signal even if the output controls are set to zero.
6 Specifications
Inputs
6 x line, stereo: . . . . . . . . . 100 mV/10 kΩ
phono, unbal.
6 x microphone, mono: . . . 1 mV/6.6 kΩ,
XLR, balanced
Outputs
Master, stereo or mono
XLR, bal: . . . . . . . . . . . . 1 V/600 Ω
phono, unbal.: . . . . . . . . 1 V/600 Ω
1 x Record, stereo: . . . . . . 310 mV/600 Ω,
phono, unbal.
1 x headphones, stereo: . . ≥ 2 x 8 Ω,
6.3 mm jack
General information
Frequency range: . . . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . . . 0.1 %
S/N ratio: . . . . . . . . . . . . . 62 dB, unweighted
Equalizer for the outputs
1 x bass: . . . . . . . . . . . . ±12 dB/50 Hz
1 x midrange: . . . . . . . . . ±12 dB/1 kHz
1 x high: . . . . . . . . . . . . . ±12 dB/10 kHz
Talkover: . . . . . . . . . . . . . . -12 dB
Power supply: . . . . . . . . . . 230 V~/50 Hz/12 VA
Ambient temperature: . . . . 0 – 40 °C
Dimensions (W x H x D): . .482 x 48 x 205 mm,
1 rack space
Weight: . . . . . . . . . . . . . . . 2.8 kg
According to the manufacturer.
Subject to change.
GB
7
Werbung
