Removing The Speaker Net; About The Ventilation Holes; Specifications - Denon SC-CX303 Bedienungsanleitung

Removing the Speaker Net

The net on the front of the speaker systems can be removed.
To remove, grasp both sides of the net and pull forward.
To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.

About the Ventilation Holes

Two ventilation holes are provided in the tweeter dome and edge to
prevent warping of the diaphragm due to thermal expansion of the air
in the tweeter dome.
The holes are normal and do not indicate damage.
Ventilation holes
Tweeter dome
4
ENGLISH

Specifications

Type: 2-way · 2-speakers
Reflex box, Low-leakage-flux
Speakers: 13 cm cone bass-mid x 1
2.5 cm soft dome high range x 1
Input impedance: 6 Ω/ohms
Max. input: 100 W (IEC)
200 W (PEAK)
Crossover frequency: 3 kHz
Frequency range: 35 Hz ~ 60 kHz
Sensitivity: 86 dB (1W · 1m)
Dimensions: 182 (W) x 296 (H) x 293 (D) mm
(Including protruding parts)
Mass: 8.7 kg
* For improvement purposes, specifications and design are subject to
change without notice.
ENGLISH