Berger & Schroter IR518C Bedienungsanleitung Seite 19

6.8 Formatting SD card
6.9 Restore factory setting
6.10 Transmit the image and video from the thermal imager to PC
The method of transmitting the image and video from the thermal imager to PC is the same as the di-
gital camera picture transmitting.
Connect the thermal imager and PC via the USB cable; the PC can identify the removable storage
device. Double-click the "GUIDE_IR" disc mark to open the storage device; there are two folders in
the storage device, "PICTURE" and "VIDEO", and these two folders are respectively stored infrared
pictures and videos. User can conduct copy, cut, and delete and etc operations as the normal files.
After operation, please eject the removable storage device "GUIDE_IR" and then pull out the USB
cable plug.
Three operations can be done according to indications shown above.
1) Press"M"to return image playback menu.
2) Press"-"to delete one infrared image and then return back to image
playback menu.
3) Press"+", you will see the picture shown as below.
According to the indication, press"-"to confirm the delete of all infrared
images, then return back to playback menu; Press"M"to cancel the de-
lete operation ,then return to image delete menu.
The operation of video playback is the same as images.
Infrared images and videos can be stored
in the built-in SD card. Choose
Format"menu, then press"M"to format
the SD card.
According to the indications shown
in the picture, press"-"to exit the
operation；Press"+"to format
SD card, see below picture
Choose "Default"then press"M", the below picture will shown on the
screen
According to the indications, press"-"to cancel the operation; Press
"+"to restore factory setting.
19