Chapter 2 Precautions And Maintenance - Berger & Schroter IR518C Bedienungsanleitung

Features:
High resolution uncooled FPA technology
Choices of lens. 2X extender is available.
Able to freeze and save the picture of infrared image.
The saved infrared picture and video can be played on the thermal imager.
The saved infrared image and video can be transmitted to the PC via the USB port.
Adopt the interpolation zoom method to perform the electronic magnification, and there are no
mosaic appeared. It takes good effect on distant observation.
Auto/Semi-auto brightness and contrast.
High reliability, compact structure ✦ License free ✦ High resolution uncooled FPA technology
✦ Two versions (384 and 160) are available, ✦ Choices of lens. 2X extender is available.
✦ Monocular viewer displays. ✦ Able to freeze and save the picture of infrared image.
✦ Able to record the video of infrared image.
✦ The saved infrared picture and video can be played on the thermal imager.
✦ The saved infrared image and video can be transmitted to the PC via the USB port.
✦ Adopt the interpolation zoom method to perform the electronic magnification, and there are no
mosaic appeared. It takes good effect on distant observation.
✦ Auto/Semi-auto brightness and contrast. ✦ Small size, light weight, and easy operation
✦ High reliability, compact structure ✦ License free.

Chapter 2 Precautions and maintenance

✦ Do not direct the IR518C Thermal Imager at very high intensity radiation sources such as the sun,
carbon dioxide lasers or arc welders etc.
✦ Do not direct the IR518C Thermal Imager at high temperature target when power-on the IR518C
Thermal Imager.
✦ When the IR518C Thermal Imager is not in use or is to be transported, ensure that the battery is
taken out and the unit is stored in the protective carry case.
✦ The IR518CThermal Imager integrates precision optical equipment and static-sensitive
electronics,
so please do not casually place, knock, or shock the thermal imager and accessories, and make
it far off the static to avoid any damages.
✦ Never attempt to disassemble or open the imager body, as this action will void the warranty.
Contact manufacturer for calibration or repair.
To ensure that the IR518C Thermal Imager is kept in a good working condition and remains
fully functional operation, the following guidelines should be respected at all times:
✦ All User Manuals and leaflets should be read thoroughly before proceeding with operation of the
equipment, please contact us if there is any unclear.
✦ Keep the IR518C Thermal Imager steady during operation.
✦ Do not use the IR518C Thermal Imager beyond the specified operation condition scope.
✦ Do not apply the non-fitted thermal imager adapter.
✦ Do not frequently power on/off the imager. The time between on and off should be not less than 20 sec.
✦ Do not pull in/out all the cables when the imager is power-on; and highly recommend to cut off
the power of all the connected electric systems when pull in/out the cables.
✦ If the observation is over or in holding state, please timely cut off the power so as to effectively
extend the imager lifetime.
✦ Pay attention to the protection of the various cables and wires that connected with thermal imager.
✦ Do not clean with chemical solvent, diluents. The clean, soft and dry flannelette is available.
As the thermal imager lens had been coated an antireflective film layer and often clean will
damage the coating, the optical surfaces of the imager lens should only be cleaned when visibly
dirty. Please avoid touching the exposed lens surface, as the acid substance on the print will
damage the coatings and lens substrates. Use only a proprietary lens cleaning tissue.
Two versions (384 and 160) are available,
Monocular viewer displays.
Able to record the video of infrared image.
Small size, light weight, and easy operation
12