Chapter 6 System Operation - Berger & Schroter IR518C Bedienungsanleitung

Chapter 6 System operation

6.1 Power Instructions icon
6.2 Menue Instruction
When the thermal imager works with the external power supply, a plug
mark will present on the right corner of the screen as the below image
shown.
When the thermal imager works with the enclosed Li-ion battery, a bat-
tery mark will present in the right corner of the screen as the below
image shown.
The system continuously monitors the power supply voltage. If the
power is not enough, there will
be a window jump out to warn the user, if user does not take any mea-
sures for it, the system will automatically shut down after a certain
power decrease.
After start-up, press the "M" button, and the menu bar will be presen-
ted on the screen as the below image shown. The button instruction
will be displayed to state the buttons function on the screen, and user
can operate as the button instruction。
Menu as follows will display on the screen.
Press "+" or "-" buttons to adjust the parameters of selected item,
press"M" to confirm the select and enter to sub-menu.
16