Power Linking; Fuse Replacement - Chauvet DJ COLORstrip series Schnellanleitung

COLORstrip/COLORstrip Mini QRG
To Begin
Product
Description
Product
Overview
AC Power

Power Linking

Fuse Replacement

Unpack your COLORstrip/COLORstrip Mini and make sure you have
received all parts in good condition. If the box or contents appear damaged,
notify the carrier immediately, not Chauvet.
The COLORstrip/COLORstrip Mini is a compact, multicolor strip light for
use in indoor
COLORstrip/COLORstrip Mini is perfect as a wash light or effect light
when paired with other COLORstrip products. Built-in infrared technology
offers wireless control with the optional Infrared Remote Control (IRC-6)
from CHAUVET DJ.
Microphone
LED Display
EXT
Menu
Controller
Buttons
Port
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
For the maximum number of COLORstrip/COLORstrip Mini that can be
power linked at 120 V or at 240 V, see the User Manual or the label on the
product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Upon plugging in the product, allow up to 30 seconds start-up time.
mobile entertainment
Power In
Fuse holder
Sensitivity
Knob
Safety Master
Loop /Slave
Output
3
applications.
Power Out
DMX In/Out
EN
The